size_functions#

class ansys.fluent.core.generated.meshing.tui_251.main_menu.boundary.remesh.size_functions(service, version, mode, path)#

Bases: TUIMenu

Enters the size functions menu where you can define size functions for controlling mesh size distribution.

Methods:

__init__(service, version, mode, path)

__init__ method of TUIMenu class.

Classes:

`compute`(service, version, mode, path)	Computes the size field based on the defined parameters.
`contours`(service, version, mode, path)	Contains options for displaying contours of size functions.
`controls`(service, version, mode, path)	Menu to control different behavior of sf.
`create`(service, version, mode, path)	Defines the size function based on the specified parameters.
`create_defaults`(service, version, mode, path)	Creates default size functions based on face and edge curvature and proximity.
`delete`(service, version, mode, path)	Deletes the specified size function or the current size field.
`delete_all`(service, version, mode, path)	Deletes all the defined size functions.
`disable_periodicity_filter`(service, version, ...)	Removes periodicity from the size field.
`enable_periodicity_filter`(service, version, ...)	Enable size field periodicity.
`list`(service, version, mode, path)	Lists all the defined size functions and the parameter values defined.
`list_periodicity_filter`(service, version, ...)	List periodic in size field.
`reset_global_controls`(service, version, ...)	Resets the global controls to their default values.
`set_global_controls`(service, version, mode, path)	Sets the values for the global minimum and maximum size, and the growth rate.
`set_prox_gap_tolerance`(service, version, ...)	Sets the tolerance relative to minimum size to take gaps into account.
`set_scaling_filter`(service, version, mode, path)	Specifies the scale factor, and minimum and maximum size values to filter the size output from the size field.
`triangulate_quad_faces`(service, version, ...)	Identifies the zones comprising non-triangular elements and uses a triangulated copy of these zones for computing the size functions.
`use_cad_imported_curvature`(service, version, ...)	Enables/disables curvature data from the nodes of the CAD facets.

__init__(service, version, mode, path)#: __init__ method of TUIMenu class.

class compute(service, version, mode, path)#

Bases: TUIMethod

Computes the size field based on the defined parameters.

class create(service, version, mode, path)#

Bases: TUIMethod

Defines the size function based on the specified parameters.

class create_defaults(service, version, mode, path)#

Bases: TUIMethod

Creates default size functions based on face and edge curvature and proximity.

class delete(service, version, mode, path)#

Bases: TUIMethod

Deletes the specified size function or the current size field.

class delete_all(service, version, mode, path)#

Bases: TUIMethod

Deletes all the defined size functions.

class disable_periodicity_filter(service, version, mode, path)#

Bases: TUIMethod

Removes periodicity from the size field.

class enable_periodicity_filter(service, version, mode, path)#

Bases: TUIMethod

Enable size field periodicity.

class list(service, version, mode, path)#

Bases: TUIMethod

Lists all the defined size functions and the parameter values defined.

class list_periodicity_filter(service, version, mode, path)#

Bases: TUIMethod

List periodic in size field.

class reset_global_controls(service, version, mode, path)#

Bases: TUIMethod

Resets the global controls to their default values.

class set_global_controls(service, version, mode, path)#

Bases: TUIMethod

Sets the values for the global minimum and maximum size, and the growth rate.

class set_prox_gap_tolerance(service, version, mode, path)#

Bases: TUIMethod

Sets the tolerance relative to minimum size to take gaps into account. Gaps whose thickness is less than the global minimum size multiplied by this factor will not be regarded as a proximity gap.

class set_scaling_filter(service, version, mode, path)#

Bases: TUIMethod

Specifies the scale factor, and minimum and maximum size values to filter the size output from the size field.

class triangulate_quad_faces(service, version, mode, path)#

Bases: TUIMethod

Identifies the zones comprising non-triangular elements and uses a triangulated copy of these zones for computing the size functions.

class use_cad_imported_curvature(service, version, mode, path)#

Bases: TUIMethod

Enables/disables curvature data from the nodes of the CAD facets.