heat_exchanger#

class ansys.fluent.core.generated.solver.tui_261.main_menu.define.models.heat_exchanger(service, version, mode, path)#

Enter the heat exchanger menu.

Methods:

__init__(service, version, mode, path)

__init__ method of TUIMenu class.

Classes:

`dual_cell_model`(service, version, mode, path)	Enter the dual cell model menu.
`macro_model`(service, version, mode, path)	Enter the heat macro-model menu.

__init__(service, version, mode, path)#: __init__ method of TUIMenu class.

class dual_cell_model(service, version, mode, path)#

Enter the dual cell model menu.

Methods:

__init__(service, version, mode, path)

__init__ method of TUIMenu class.

Classes:

`add_heat_exchanger`(service, version, mode, path)	Add heat-exchanger.
`alternative_formulation`(service, version, ...)	Enable/disable alternative formulation for heat transfer calculations.
`delete_heat_exchanger`(service, version, ...)	Delete heat-exchanger.
`heat_exchanger`(service, version, mode, path)	Enable/disable the dual cell heat-exchanger model.
`modify_heat_exchanger`(service, version, ...)	Modify heat-exchanger.
`plot_NTU`(service, version, mode, path)	Plot NTU vs primary mass flow rate for each auxiliary mass flow rate.
`write_NTU`(service, version, mode, path)	Write NTU vs primary mass flow rate for each auxiliary mass flow rate.

__init__(service, version, mode, path)#: __init__ method of TUIMenu class.

class add_heat_exchanger(service, version, mode, path)#

Add heat-exchanger.

class alternative_formulation(service, version, mode, path)#

Enable/disable alternative formulation for heat transfer calculations.

class delete_heat_exchanger(service, version, mode, path)#

Delete heat-exchanger.

class heat_exchanger(service, version, mode, path)#

Enable/disable the dual cell heat-exchanger model.

class modify_heat_exchanger(service, version, mode, path)#

Modify heat-exchanger.

class plot_NTU(service, version, mode, path)#

Plot NTU vs primary mass flow rate for each auxiliary mass flow rate.

class write_NTU(service, version, mode, path)#

Write NTU vs primary mass flow rate for each auxiliary mass flow rate.

class macro_model(service, version, mode, path)#

Enter the heat macro-model menu.

Methods:

__init__(service, version, mode, path)

__init__ method of TUIMenu class.

Classes:

`delete_heat_exchanger_group`(service, ...)	Delete heat-exchanger group.
`heat_exchanger`(service, version, mode, path)	Enable/disable heat-exchanger model.
`heat_exchanger_group`(service, version, mode, ...)	Define heat-exchanger group.
`heat_exchanger_macro_report`(service, ...)	Report heat-exchanger information for all the macros.
`heat_exchanger_model`(service, version, mode, ...)	Define heat-exchanger core model.
`heat_exchanger_report`(service, version, ...)	Report heat-exchanger information.
`heat_exchanger_zone`(service, version, mode, path)	Define heat-exchanger zone.
`plot_NTU`(service, version, mode, path)	Plot NTU vs primary mass flow rate for each auxiliary mass flow rate.
`write_NTU`(service, version, mode, path)	Write NTU vs primary mass flow rate for each auxiliary mass flow rate.