options#

class ansys.fluent.core.solver.tui_231.main_menu.setup.models.dpm.options(path, service)#

Bases: TUIMenu

Enter the options menu to set optional DPM models.

Methods:

`allow_supercritical_pressure_vaporization`(...)	Skip the pressure dependent boiling point calculation to allow supercritical pressure conditions for vaporization.
`brownian_motion`(args, *kwargs)	Enable/disable Brownian motion of particles.
`convective_film_heat_transfer`(args, *kwargs)	Enable/disable convection/conduction film to wall heat transfer model.
`current_positions_in_sample_file_format`(...)	Write the current positions (step-by-step history report for unsteady tracking) in the sampling file format.
`enable_contour_plots`(args, *kwargs)	Enable contour and vector plots of particle data.
`ensemble_average`(args, *kwargs)	Set ensemble average cloud properties.
`erosion_accretion`(args, *kwargs)	Enable/disable erosion/accretion.
`include_lwf_particles_in_dpm_concentration`(...)	Include LWF particle mass in DPM Concentration.
`init_erosion_accretion_rate`(args, *kwargs)	Initialize erosion/accretion rates with Zero.
`lowest_volatiles_mass_fraction`(args, *kwargs)	Set the lowest volatiles mass fraction.
`maximum_udf_species`(args, *kwargs)	Maximum number of species that can interact with particles in the DPM UDFs.
`particle_radiation`(args, *kwargs)	Enable/disable particle radiation.
`pressure_gradient_force`(args, *kwargs)	Enable/disable pressure gradient force.
`remove_wall_film_temperature_limiter`(*args, ...)	Remove the wall film temperature limiter.
`saffman_lift_force`(args, *kwargs)	Enable/disable Saffman lift force.
`scr_urea_deposition_risk_analysis`(*args, ...)	Options to activate and configure the SCR urea deposition risk analysis.
`set_minimum_particle_diameter`(args, *kwargs)	Set the minimum particle diameter.
`set_thermolysis_limit`(args, *kwargs)	Set the thermolysis limit.
`stagger_radius`(args, *kwargs)	Provide a stagger radius for non atomizer injections.
`stagger_spatially_atomizer_injections`(*args, ...)	Spatially stagger atomizer injections?.
`stagger_spatially_standard_injections`(*args, ...)	Spatially stagger non-atomizer injections?.
`stagger_temporally`(args, *kwargs)	Stagger transient parcels for their first time step?.
`staggering_factor`(args, *kwargs)	Set the staggering factor between 0 and 1 to control the amount of staggering.
`step_report_sig_figures`(args, *kwargs)	Set significant figures in the step-by-step report.
`thermophoretic_force`(args, *kwargs)	Enable/disable thermophoretic force.
`track_in_absolute_frame`(args, *kwargs)	Enable/disable tracking in absolute frame.
`treat_multicomponent_saturation_temperature_failure`(...)	Dump multicomponent particle mass if the saturation temperature cannot be determined.
`two_way_coupling`(args, *kwargs)	Enable/disable calculation of DPM sources in TKE equation.
`uniform_mass_distribution_for_injections`(...)	A uniform mass distribution will be enabled for all solid cone and atomizer injections.
`use_absolute_pressure_for_vaporization`(...)	Enable/disable using Absolute Pressure for Vaporization.
`vaporization_heat_transfer_averaging`(*args, ...)	Enable/disable correction for Vaporization heat transfer.
`vaporization_options`(args, *kwargs)	Set Vaporization options.
`virtual_mass_force`(args, *kwargs)	Enable/disable virtual mass force.

allow_supercritical_pressure_vaporization(*args, **kwargs)#: Skip the pressure dependent boiling point calculation to allow supercritical pressure conditions for vaporization.

brownian_motion(*args, **kwargs)#: Enable/disable Brownian motion of particles.

convective_film_heat_transfer(*args, **kwargs)#: Enable/disable convection/conduction film to wall heat transfer model.

current_positions_in_sample_file_format(*args, **kwargs)#: Write the current positions (step-by-step history report for unsteady tracking) in the sampling file format.

enable_contour_plots(*args, **kwargs)#: Enable contour and vector plots of particle data.

ensemble_average(*args, **kwargs)#: Set ensemble average cloud properties.

erosion_accretion(*args, **kwargs)#: Enable/disable erosion/accretion.

include_lwf_particles_in_dpm_concentration(*args, **kwargs)#: Include LWF particle mass in DPM Concentration.

init_erosion_accretion_rate(*args, **kwargs)#: Initialize erosion/accretion rates with Zero.

lowest_volatiles_mass_fraction(*args, **kwargs)#: Set the lowest volatiles mass fraction.

maximum_udf_species(*args, **kwargs)#: Maximum number of species that can interact with particles in the DPM UDFs.

particle_radiation(*args, **kwargs)#: Enable/disable particle radiation.

pressure_gradient_force(*args, **kwargs)#: Enable/disable pressure gradient force.

remove_wall_film_temperature_limiter(*args, **kwargs)#: Remove the wall film temperature limiter.

saffman_lift_force(*args, **kwargs)#: Enable/disable Saffman lift force.

scr_urea_deposition_risk_analysis(*args, **kwargs)#: Options to activate and configure the SCR urea deposition risk analysis.

set_minimum_particle_diameter(*args, **kwargs)#: Set the minimum particle diameter.

set_thermolysis_limit(*args, **kwargs)#: Set the thermolysis limit.

stagger_radius(*args, **kwargs)#: Provide a stagger radius for non atomizer injections.

stagger_spatially_atomizer_injections(*args, **kwargs)#: Spatially stagger atomizer injections?.

stagger_spatially_standard_injections(*args, **kwargs)#: Spatially stagger non-atomizer injections?.

stagger_temporally(*args, **kwargs)#: Stagger transient parcels for their first time step?.

staggering_factor(*args, **kwargs)#: Set the staggering factor between 0 and 1 to control the amount of staggering.

step_report_sig_figures(*args, **kwargs)#: Set significant figures in the step-by-step report.

thermophoretic_force(*args, **kwargs)#: Enable/disable thermophoretic force.

track_in_absolute_frame(*args, **kwargs)#: Enable/disable tracking in absolute frame.

treat_multicomponent_saturation_temperature_failure(*args, **kwargs)#: Dump multicomponent particle mass if the saturation temperature cannot be determined.

two_way_coupling(*args, **kwargs)#: Enable/disable calculation of DPM sources in TKE equation.

uniform_mass_distribution_for_injections(*args, **kwargs)#: A uniform mass distribution will be enabled for all solid cone and atomizer injections.

use_absolute_pressure_for_vaporization(*args, **kwargs)#: Enable/disable using Absolute Pressure for Vaporization.

vaporization_heat_transfer_averaging(*args, **kwargs)#: Enable/disable correction for Vaporization heat transfer.

vaporization_options(*args, **kwargs)#: Set Vaporization options.

virtual_mass_force(*args, **kwargs)#: Enable/disable virtual mass force.